29
Color Sensor
7.15. External Teach-in Input
When the pin is set up as an input for external teach-in, you can select whether the input is Ub active or Ub
inactive and which output will be taught in externally:
Function
Description
E3 External Teach-in
(example)
Setting E2, E3 and/or E7 input
Ub
Output
Back
Run
Ub active:
The input is activated when operating voltage (Ub) is on.
Ub inactive:
The input is activated when operating voltage is off.
Output:
When the input is activated, the selected output is taught in.
Depending on the selected operating mode, external teach-in executes either a window or an assignment
teach-in operation. An operation is triggered by applying an edge to the input (i. e. by changing the electrical
signal from negative to positive or vice versa).
7.16. Display
Function
Description
Display
Adjusting the display device
Rotate
Intensity
Mode
Back
Run
Rotate:
Rotate display by 180°.
The display is rotated by 180° by pressing the key.
The rotation is canceled by pressing this key again.
Intensity:
Set the display intensity
Mode:
Select display mode
Intensity
Set the display intensity
Normal
Power save
Screen saver
Back
Run
Normal:
The intensity of the display is set to a normal value.
Power save:
The display switches off after one minute without a button
being pressed and automatically switches back on when a
button is pressed.
Screen saver:
The colors of the display are inverted every minute.
Mode
Select display mode
Digital
Bar Graph
Back
Run
Digital:
The condition of each output is indicated on the display.
Bar Graph:
The ROYGBV color spaces / shares of the object are indi-
cated in a bar graph.
