28
P1XF001
7.12.2. Thresholds
In the
Assignment
operating mode
In the “Assignment” operating mode, a threshold can be set for each individual hue:
• Red
• Orange
• Yellow
• Green
• Blue
• Violet
7.13. Error or Contamination Output
When the pin is configured as an error or a contamination output, the following functions can be selected:
Function
Description
A1 Error
(example)
Error output or contamination output
NPN/PNP
NO/NC
Back
Run
NPN/PNP:
Output configuration
NO/NC:
Output configuration
Explanations concerning “NPN/PNP” are included in section „7.8. NPN PNP“ on page 24. Explanations
concerning “NO/NC” are included in section „7.7. NO/NC Output Function“ on page 24.
7.14. Emitted Light or Trigger Input
When the pin is set up, for example, as an input for shutting down emitted light, you can select whether the
input is Ub active or Ub inactive:
Function
Description
E3 Emitted Light
(example)
Setting E2, E3 and/or E7 input
Ub active
Ub inactive
Back
Run
Ub active:
The input is activated when operating voltage (Ub) is on.
Ub inactive:
The input is activated when operating voltage is off.
An operation is triggered by applying an edge to the input (i. e. by changing the electrical signal from negative
to positive or vice versa).
