24
P1XF001
7.6. Assignment Teach-in
NOTE!
The menu item is only visible if the operating mode is set to “Assignment”.
Function
Description
T Assignment
Assignment Teach-In
<T> for Teach-in
T
Teach-In Assignment-Teach-In process:
1) Adjust light spot to the object color.
2) Press “T” button. -> The object color is taught in and allocated to the approp-
riate output.
An explanation of the “Assignment” operating mode is included in section
„7.18. Operating mode“ on page 30.
7.7. NO/NC Output Function
Function
Description
NO/NC
Output configuration
NO
NC
Back
Run
NO:
Normally open.
The output closes as soon as an object reaches the switching point.
NC:
Normally closed.
The output opens as soon as an object reaches the switching point.
7.8. NPN PNP
Function
Description
NPN/PNP
Output configuration
PNP
NPN
Push-pull
Back
Run
PNP:
A load or the evaluation device is connected between the negative
pole (supply) and the output. If switched, the output is connected with
the positive pole via an electric switch.
NPN:
A load or the evaluation device is connected between the positive pole
(supply) and the output. If the sensor switches, the output is connected
with the negative pole via an electric switch.
Push-pull:
Push-pull output.
Acts like an electronic switch which optionally switches the output to
the positive pole or the negative pole.
