9
5. Mounting Instructions
All applicable electrical and mechanical regulations, standards and safety precautions must be adhered to
when installing and operating the scanner. The scanner must be protected against mechanical influences.
Install the product such that its installation position cannot be inadvertently changed.
6. Initial Operation
6.1. Initial Operation
Connect the Scanner to supply power (18 to 30 V DC). The display view appears. The Scanner is ready for
operation after 2 seconds.
The desired menu language must be selected after initial start-up, and after each reset (see section “7.10.
Language” on page 22).
Note:
If no settings are adjusted in the configuration menu for a period of 30 seconds, the scanner is automati-
cally returned to the display mode.
The Scanner accesses the last used menu view when the key is pressed twice. If a setting is configured, it
becomes active as soon as it is changed.
Letters or symbols such as “+” and “–” can also be assigned to the keys within a menu item. Quicker scrolling
through numbers is this made possible by pressing and holding the “+” or “–” key.
Meaning of the menu items:
Back
: Move up one level within the menu.
Run
: Switch to the display mode.
