30
EN
9.4.6. Terminator
Characters can be added to the read code. The desired characters have to be registered as digit value (ASCII
decimal display). An ASCII table can be found in the appendix.
9.4.7. Match code
Activate or deactivate the match code function.
9.4.8. Current Match code
The currently taught in match code is displayed. The match code can be changed in the entry field. Only al-
phanumeric characters can be used.
The new match code is transmitted to the Scanner by clicking the send
button.
9.4.9. Match and Mismatch Performance
The “replace code in case of match or mismatch” function can be used to determine whether or not the
scanned code will be replaced with a message, and if so which message will be displayed. Only alphanumeric
characters can be used.
What happens if the read operation fails?
If the NoRead function is enabled, the scanner sends the NoRead text via the serial and Ethernet interface if a
code could not be read within the read timeout.
