12
EN
Which functions can be executed with the individual menu options is explained below.
7.1. Run
The Scanner is switched to the display mode when the enter key is pressed.
7.2. Pin Function
The pin function is used to specify the function assigned to pins E/A1 through E/A4. Various functions can be
assigned to the pin.
E/A1
Configuration of Pin E/A1
|
Good Read
|
No Read
|
Match
|
Mismatch
|
Trigger Input
|
New Master
Back
Run
Good Read:
Switching output for successful read.
No Read:
Switching output for unsuccessful read attempt (only active in trigger
mode)
Match:
Switching output for successful match comparison of a code.
Mismatch:
Switching output for match comparison without equivalence.
Trigger Input:
Input for triggering the Scanner. The trigger function must be acti-
vated with the reading cycle menu option for trigger mode operation.
Master:
Input for reading a new Match code against which comparison will
take place. The next code to be read in becomes a Match code.
7.3. E/A Settings
After selecting the pin function, one of the following menus appears.
Each of the menus includes the following items:
For Good Read
When a pin is configured as a Good Read output, the following functions can be set up:
A1 Good Read/
A2 Good Read/
A3 Good Read/
A4 Good Read
Basic Scanner settings for the individual switching outputs are entered to the
A1/A2/A3/A4 Good Read menu.
NPN/PNP
NO/NC
ON Delay
OFF Delay
Impulse
Back
Run
NPN/PNP:
Output configuration
NO/NC:
Output configuration
ON Delay:
ON Delay
OFF Delay:
OFF Delay
Impulse:
Pulse Length
