4
The following tools are required for assembly.
• Assorted wrenches
• Cordless drill and cordless impact driver
• 3/8", 7/16", 1/2" and 9/16" hex nut bit
• 3/8" drift pin
• Mallet
• 24" carpenters' square
• 9/32" and 25/64" drill bit
• Chalk line
• Box level
• C-clamp set
• Phillips screwdriver
• Hex wrench set
• 3/8", 1/2" and 3/4" drive sockets
• 7/16" deep well socket and drive adapter
with a universal
• Ratchet
•
Angle finder
• 100" measuring tapes (2)
• 25' tape rule
• Claw hammer
• Caulk gun
• Rivet gun
*Save the wood blocks from the tower frame and ceiling truss packaging.
They will be used later during the tower assembly.
Required Tools
Wing
Harnesses
Span Set Slings
Lifting Casters
Locking Clamps
1-ton Invertible Hoist
• Lifting casters
• Locking clamps
• Chain
• Wing harnesses
• Span set slings
• 1-ton invertible hoist
Rigging Equipment
The installers must supply the following rigging equipment for the tower installation.
Chain
