18
Attach Leveler Assembly
1. Attach the two leveler assemblies to the bottom of the base.
a. Turn the 1-8 hex jam nut on both leveler assemblies to be at the same height.
b. Turn each leveler assembly onto the base until the jam nut contacts the bottom of the base.
c. Adjust the leveler assembly so that the distance between the bottom of the wing panel and the
bottom of the leveler pad is 2" (51 mm).
Tower Installation (continued)
Leveler
Assembly
1-8 Hex
Jam Nut
2" (51 mm)
Bottom of Panel
to Bottom of Pad
