![background image](http://html.mh-extra.com/html/wen/70730/70730_instruction-manual_956563018.webp)
USING THE DUST COLLECTION BAG
WARNING:
Do not use dust bag or dust collection when cutting metal. Risk of fire and explosion can
occur due to hot metal dust or flying sparks.
Use the dust collection bag for wood cutting operations. Squeeze together the metal ring on the dust bag and attach
it to the dust extraction port on the back of the saw.
Empty the dust bag by opening the zipper on the bottom of the bag. For efficient operation, empty the dust bag
when half full to allow for better air flow through the bag.
ASSEMBLY AND ADJUSTMENTS
CHANGING THE SAW BLADE SPEED
The miter saw can be operated with two speeds. The speed switch is located at the back of the saw arm. Select the
suitable speed for the material being cut. Do not change the blade speed while the miter saw is running.
1. LOW SPEED: 2000 RPM, recommended for cutting mild steel.
2. HIGH SPEED: 4500 RPM, recommended for cutting wood, plastic, aluminum, bronze alloy and copper alloy.
LIMITING THE CUTTING DEPTH
The saw cutting depth can be adjusted using the depth adjust-
ment screw located beside the laser switch.
1. Loosen the nut on the depth adjustment screw (Fig. 14 - 1).
2. Rotate the screw (Fig. 14 - 2) in or out to set the required cut-
ting depth. Tighten the nut to lock the depth adjustment screw
in place.
3. Check the cutting depth setting by completing a test cut.
1
2
Fig. 14
18
Summary of Contents for 70730
Page 23: ...EXPLODED VIEW PARTS LIST 23 ...
Page 27: ...THANKS FOR REMEMBERING ...