![background image](http://html.mh-extra.com/html/wen/70730/70730_instruction-manual_956563013.webp)
ASSEMBLY AND ADJUSTMENTS
4. TO ADJUST THE MITER ANGLE
The rotary table can be adjusted from 0° to 45° to both left
and right to create miter cuts. To adjust the miter angle,
push down the miter lock and lift up the miter stop lever.
Rotate the miter table to the desired angle indicated by
the pointer on the miter scale. The rotary table features
positive click stops at 0°, 15°, 22.5°, 30°, and 45° in both
directions for quick settings.
Push up the miter lock to lock the miter table in place.
Release the miter stop lever to lock the table in place,
making sure it clicks into one of the stops.
Be sure the miter table is locked in place before making
a cut. Failure to do so can cause the table to move during
the cut, resulting in serious personal injury.
5. TO INSTALL THE SUPPORT TABLE
Attach the support tables by mounting them into the
holes on both sides of the miter saw. Adjust the table to
the suitable distance and tighten the table lock screws.
Pull up the work support stop to utilize the stop face to
set your cut to the desired length.
6. TO INSTALL THE CLAMP
The clamp assembly can be mounted on the left or right
side of the saw depending on the cutting task.
Attach the clamp assembly by inserting it into its
respective hole. Check that the clamp won’t interfere
with the blade travel and secure it in place with the
clamp lock screws.
Rotate the clamp knob to move it up or down as needed
for securing the workpiece. Check that the workpiece is
secure and will not wobble before cutting.
Miter Lock
Table Lock Screws
Support Table
Clamp Assembly
Clamp Lock Screws
Clamp Knob
Miter Stop Lever
Miter Scale
13
Summary of Contents for 70730
Page 23: ...EXPLODED VIEW PARTS LIST 23 ...
Page 27: ...THANKS FOR REMEMBERING ...