SOME NOTES ABOUT POWER CORDS
Long or thin cords can drain the power provided to an electrical device by the generator. When
using such cords, allow for a slightly higher rated wattage requirement by the electrical device.
See Figure 16 for recommended cords based on the power requirement of the electrical device.
Device Requirements
Max. Cord Length (ft) by Wire Gauge
Amps
Watts (120V)
Watts (240 V)
#8 wire #10 wire
#12 wire #14 wire #16 wire
2.5
300
600
NR
1000
600
375
250
5
600
1200
NR
500
300
200
125
7.5
900
1800
NR
350
200
125
100
10
1200
2400
NR
250
150
100
50
15
1800
3600
NR
150
100
65
NR
20
2400
4800
175
125
75
50
NR
25
3000
6000
150
100
60
NR
NR
30
3600
7200
125
65
NR
NR
NR
40
4800
9600
90
NR
NR
NR
NR
*NR= not recommended
Figure 16- Maximum Extension Cord Lengths by Power Requirement
DC Usage
This Generator is equipped with a cigarette lighter style 12V DC receptacle. The maximum draw
for this DC outlet is 8.3 Amps. The 12V DC receptacle is not intended for use to charge
automotive batteries.
The cigarette lighter style receptacle permits the use of any electrical device designed for use in a
12V DC cigarette style outlet similar to ones found in automobiles. The electrical device has a
power cord with a metal pin on the bottom and two leaf springs on the sides. Some common
automotive type electrical devices are inflators, vacuum cleaners, chargers of various types and
more.
To Use: Simply plug the electrical device power cord into the 12V DC outlet and ensure the power
cord is securely in place. Use the device as instructed. Remove after use by simply pulling the
power cord out of the receptacle. The 12V DC receptacle is protected against overloads by an in-
line fuse located behind the control panel.
22
Summary of Contents for 56877
Page 34: ...ENGINE EXPLODED VIEW AND PARTS LIST 31...
Page 36: ...GENERATOR EXPLODED VIEW AND PARTS LIST 33...
Page 38: ...WIRING DIAGRAM 35...
Page 40: ...NOTES 37...