76
Step 4: Select FXS gateway’s Caller ID Mode. See Figure 22 and 23.
FXS Gateway Caller ID generation is able to configure which Caller ID mode in
order to match analog phone set’s Caller ID specification. Go to FXS Setting
Caller ID
Caller ID Mode to select one of Caller ID Mode (
DTMF, FSK
Bellcore, FSK ETSI, See Figure 23
). There are other options you may need to
pay attention at
Polarity Reverse Before Caller ID, Dual Tone Before Caller ID,
Caller ID Present, DTMF Caller ID start and stop digit. See Figure 22.
Figure 21. Caller ID feature enable.
Figure 22. Select Caller ID Mode.
Summary of Contents for WellGate 2540
Page 1: ...Welltech 2540 FXO Gateway User Guide...
Page 59: ...59 4 copy firmware successfully 5 reboot 7 Check whether the system was recovered or not...
Page 77: ...77 Figure 23 Three options of Caller ID Mode...
Page 79: ...79 Figure 25 Loop Current Drop to release FXO port Figure 26 Loop Current Drop detection Time...