background image

M01

1B.02  2M-308015  Owners Manual for Bottom-Mount 

Autofill W

armers

CUSTOMER SERVICE DATA

please have this information available if calling for service

RESTAURANT _____________________________  LOCATION  _____________ 
INSTALLATION DATE ________________________ TECHNICIAN ___________ 
SERVICE COMPANY ________________________________________________ 

ADDRESS ___________________________ STATE ______ ZIP__________ 
TELEPHONE NUMBER (_____)_____-_________ 

EQUIPMENT MODEL NO. _______________ 
EQUIPMENT SERIAL NO. _______________
        VOLTAGE: (

check one

)     120       208      240  

DESCRIPTION 

PART NO.

ACCESSORIES

4 QT. ROUND INSET w/ lid 

WS-20774

7 QT. ROUND INSET w/ lid 

WS-20587

11 QT. ROUND INSET w/ lid 

WS-20908

11 QT. ROUND INSET w/ hinged lid 

5D-21057

DRAIN VALVE EXTENSION KIT, extension from 

  drain to counter front with remote handle, for use with “D” models 

only, excluding “DM” models 

WS-20385

DRAIN SCREEN 

P2-31869

OPTIONAL 72” WIRING, thermostatically controlled warmers   **
**  contact factory customer service for availability

PARTS & SERVICE 

17

IMPORTANT:

 Use only factory 

authorized service parts and 

replacement filters.

For factory authorized service, 
or to order factory  authorized 
replacement parts, contact 
your Wells authorized service 
agency, or call:

Wells 

Manufacturing

265 Hobson Street

S

mithville, Tennessee 37166

 U

.

S

.

A

.

 

Service Dept.

phone: (314) 678-6314
fax:       (314) 781-2714

Service Parts Department 
can supply you with the name 
and telephone number of 
the WELLS  AUTHORIZED     
SERVICE AGENCY 
nearest you.

Summary of Contents for BMW206RTDU/AFU

















Reviews: