Wellis Amazon W-Flow User Manual Download Page 67

Page: 67 / 144

WIFI

(This function is available only if an in.touch module is connected to your system.)

WIFI SETTINGS

To modify wifi network settings, slide

the right wheel until the wifi icon is

highlighted in the middle.

WIFI NETWORKS

After a few seconds the available net-

works will appear on the screen, as well

as their signal strength.
Selected network will be identified by a

green check mark.
Swipe Up or Down the list to select your

network.

WIFI NETWORK PASSWORD

If the wifi network is password protect-

ed, enter it when keyboard prompts.

Use Enter key to validate the password.
If no password is required the in.touch

will connect automatically.

USER INTERFACE - SMART TOUCH

KEYPAD COLOR (OPTIONAL)

If this option is available (depending on

the hot tub configuration), the keypad

rim color can be changed. 8 pre-de-

fined colors are available. If the in.mix is

installed, the keypad rim color can also

be associated to an in.mix zone.

Summary of Contents for Amazon W-Flow

















































































































































Search results

Summary of Contents for Amazon W-Flow

Reviews:

Related manuals for Amazon W-Flow

Brands by name

Popular brands

Wellis Amazon W-Flow, User Manual

Search results

Summary of Contents for Amazon W-Flow

Reviews:

Related manuals for Amazon W-Flow

Brands by name

Popular brands