Wellis Amazon W-Flow, User Manual

Page: 142 / 144

When we do not use the hot tub often, mostly in the
winter (around 3 times a week), which is the most
energy efficient setting, taking into account the energy
necessary for reheating? We only use it a couple of times
a week, 37 degrees Celsius is our favourite temperature.
Should it be in Sleep or Economy mode? Should I switch
to the Standard setting only when heating the hot tub?
Or should it always stay on Standard?
If you only use it 2-3 times a week, the most efficient way is to
keep the water at operational temperature (38 degrees Cel-
sius). Thanks to the excellent insulation and the thermo cover
this setting requires less energy than letting the water cool
down and reheating it before usage. The heating system au-
tomatically switches on in case the water temperature drops
more than half a degree Celsius. In the summer the Economy
setting is recommended as the external temperature is usual-
ly high. Only use the Sleep setting if you are not using the hot
tub for a longer period of time (3-4 weeks).
Does the hot tub switch back to the last used setting if
there is a power outage?
When connecting the hot tub to the power supply it switches
to charging mode. Push the “Temp” button to set it to the
Standard setting and it will display the water temperature.
The hot tub will switch back to the last used setting after a
power outage.
Can the filtration cycle only be programmed to 1-8 hour
periods? Is there something like a 3-hour period? What is
ideal and what is adequate?
The filtration cycle can be set to 1-8 hour or continuous
settings. If you have a hot tub equipped with the in.clear au-
tomatic water management system, a daily 8-hour circulation
period is recommended to produce necessary amounts of
bromine. The 8-hour (2x4 hour) setting is ideal.
Can the operating device for our hot tub be placed in an
external location where only the staff can access it?
The operating device can only be placed 5 meters cable
length away from the hot tub.
What is the service life of the UV-C lamp?
If the filtration cycle is set to the continuous (0-24) setting,
then the service life of the UV-C lamp is 8000-9000 hours.
With continuous setting the most effective water disinfectant
system can reduce the necessary amount of chemicals by
30-50% depending on usage.
IN.CLEAR
Why is the water turbulent/oily?
If the water is turbulent or oily after heavy usage, perform a
refill and wait 24 hours until conditions are suitable for usage.
If the problem persists, contact your service provider to
perform the necessary water equilibriation.
Does sodium-bromide vaporize?
No. Sodium-bromide will only leave the hot tub in case of splashing,
leaking, or draining.
What should I use to clean my hot tub?
Only nonfoaming nonacerbic cleaning products available at
professional dealerships.
If the in.clear bromine generator is switched off, is the
hot tub still being disinfected by sodium bromide?
No. The in.clear system does not disinfect while switched off.
However, if there is a level of bromine left over in the water,
it will continue the disinfecting process. The In.clear system
can be switched off for certain periods of time and the hot
tub will remain nice and clean. Sodium bromide becomes
bromine when it passes through the electrodes of the in.clear
system, while the pump connected to the in.clear system is
operational.
FREQUENTLY ASKED QUESTIONS
142