Well WRC5020N User Manual Download Page 205

Page: 205 / 242

WELL WRC5020N User’s Manual

205

Log

This page can be used to set remote log server and show the
system log.

System Log

1. From the left-hand Management menu, click on Log. The

following page is displayed:

Option

Description

Enable Log

Enable/Disable the feature.

Default: Disable

system all

All system logs will be recorded in the system log

wireless

The wireless logs will be recorded in the system log

DoS

The DoS logs will be recorded in the system log

Enable

Remote Log

Enable: Send the system log to remote log server. To do this, make sure a
secure syslog server is available. Default: Disable

Log Server IP

Address

Enter the IP Address of remote log server.

Summary of Contents for WRC5020N



















































































































































































































































Search results

Summary of Contents for WRC5020N

Reviews:

Related manuals for WRC5020N

Brands by name

Popular brands

Well WRC5020N, User Manual

Search results

Summary of Contents for WRC5020N

Reviews:

Related manuals for WRC5020N

Brands by name

Popular brands