Well DA-150N, User Manual

Page: 196 / 211

User’s Guide Configuring your Computers
5. Click on
Microsoft
in the Manufacturers list box, and then
click
TCP/IP
in the Network Protocols list box.
6. Click
OK
to return to the Network dialog box, and then click
OK
again.
You may be prompted to install files from your Windows
95/98 installation CD. Follow the instructions to install the
files.
7. Click
OK
to restart the PC and complete the TCP/IP
installation.
Next, configure the PCs to accept IP information assigned by
the Wireless ADSL2+ Router:
8. Open the Control Panel window, and then click the Network
icon.
9. Select the network component labeled TCP/IP, and then
click
Properties
.
If you have multiple TCP/IP listings, select the listing
associated with your network card or adapter.
10. In the TCP/IP Properties dialog box, click the IP Address
tab.
11. Click the radio button labeled
Obtain an IP address
automatically
.
12. Click the DNS Configuration tab, and then click the radio
button labeled
Obtain an IP address automatically
.
13. Click
OK
twice to confirm and save your changes.
You will be prompted to restart Windows.
14. Click
Yes
.
Windows NT 4.0 workstations
First, check for the IP protocol and, if necessary, install it:
1. In the Windows NT task bar, click the
Start
button, point to
Settings
, and then click
Control Panel
.
2. In the Control Panel window, double click the Network icon.
3. In
the
Network dialog
box, click the
Protocols
tab.
The
Protocols
tab displays a list of currently installed
network protocols. If the list includes TCP/IP, then the
protocol has already been enabled. Skip to step 9.
4. If TCP/IP does not display as an installed component, click
Add…
5. In the
Select Network Protocol
dialog box, select
TCP/IP
,
and then click
OK
.
You may be prompted to install files from your Windows NT
installation CD or other media. Follow the instructions to
install the files.
After all files are installed, a window displays to inform you
that a TCP/IP service called DHCP can be set up to
dynamically assign IP information.
6. Click
Yes
to continue, and then click
OK
if prompted to
restart your computer.
Next, configure the PCs to accept IP information assigned by
the Wireless ADSL2+ Router:
196