User Manual
6
Feed Rolls
The feed rolls will wear over time. Check the roll grooves for wear
and debris. Debris can be removed with a wire brush. If the groove is
excessively worn, replace.
To change the feed rolls;
•
both the pressure roll and the feed roll.
• The drive roll has a retaining cap to lock the roll to the drive shaft. This will lift
•
drive to lever them if they are tight.
• Replace the rolls with the required size.
•
shaft mount.
•
• Secure both rolls with the screws, tightening with a screw driver.
Screws
Retaining Cap
Pressure Roll
Drive Roll
