3
User Manual
Push Pull Torch Introduction
Function
The Push Pull MIG welding torch consists of a mechanical drive block that
incorporates a DC drive motor. This drives feed rolls that pull the welding wire push
fed from a wire feeding unit and power source, feeding it through a MIG welding
swan neck front end.
Swan Neck
Wire Feed Speed Control
Welding Torch
Platinum PP365
Duty Cycle
270A @ 60% (Mixed Gas Ar+CO2)
Wires
0.8 - 1.6mm
Reference Torch Wire Feed Data
Nominal Wire
Feed Speed
M/Min
Ft/Min
Min
1.5
4.9
+/- 10%
Max
28.5
93.5
+/- 10%
Technical Data
The welding torch is supplied with a neck fitted. All necks are
fully rotatable through 360°.
Fine tuning of wire feed rates can be made via a speed control mounted
on the separate drive module. The drive module is fitted to the torch control input
lead. For more details see further informatin n this manual.
