User Manual
5
Nozzle and Front End Consumables
Remove the nozzle from the front of the neck. Remove all spatter from
short circuit. Check all front end consumables for damage and wear.
Replace with new if necessary.
To maintain the best performance repeatedly check and clean the front end
consumables periodically. Also use an anti spatter spray on the consumables to
reduce the build up of debris.
Torch Feed Unit
Open the torch feed unit hatch and inspect. Wire scale debris will build
up inside the torch around the feed unit mechanism. Regularly clean
out the torch feed unit using an air blow gun to blow out this debris.
To maintain the best operation of the torches feed mechanism clean
out the debris daily before use at the very least.
Keep gas holes
clear of spatter and
debris
