Welch Allyn SCANTEAM 8300, Programming Menu Manual

Page: 36 / 54

8300 Series Information and Examples
DATA FORMATTER
COMMANDS
continued
MSR DATA
Start/Stop Character Transmit: Start/Stop characters identify the leading
and trailing ends of the MSR data. You may either transmit, or not transmit
Start/Stop characters.
LRC Character Transmit: This setting will enable or disable the transmission
of a check digit for mag stripe data.
Start and End of MSR Data: Use these selections to program the start/stop
characters you wish to use for MSR data. The start and end of MSR data is
assigned a special symbology of “FD.”
MSR TRACK SELECTION
Use this selection if you wish to enable or disable tracks 1, 2, and/or 3.
MSR PRE–EDITED DATA FORMATS
These selections allow you to program the 8300 to transmit magnetic stripe
data in a variety of formats which can include the account number, date,
customer name, and any of the key code variables.
Note: Choosing a pre-edited MSR Data Format results in default selections for MSR
Data (III). Therefore, Start/Stop Character Transmit and LRC Character
Transmit will default to Yes.
KEY CODE ASSIGNMENT
Key Codes are variables used to represent values in MSR data formats. Use
this selection to assign values to the key codes.
Note: Assignable delimiter or function codes all default to “0D.”
DELETE TERMINAL/CODE SPECIFIC
Use this selection to delete any formats which are specific to certain terminal
and code ID combinations.
34