Welch Allyn SCANTEAM 8300, Programming Menu Manual

Page: 12 / 54

1
IBM PC, PC/XT
IBM PC/AT
IBM PS2 (50–80)
IBM 3180 (122 Key)
IBM 3683
NCR 2152
NCR 7052
Style A
8300 Series Information and Examples
OUTPUT
PARAMETERS
If you are using one of the terminals listed below, you may program an
alternate keyboard style. For example, if you have an IBM 3683 terminal with a
52 key keyboard, you would program the Keyboard Style as “C.”
Style B
XT
AT
NORM
T/W
35 Key
27 Key
34 Key
CAPS LOCK
CAPS LOCK
CAPS LOCK
D/E
48 Key
50 Key
56 Key
AUTO CAPS
52 Key
122 Key Caps On
Style C
KEYBOARD STYLE
Terminal Style D
122 Key Caps Off
10
BEEPER VOLUME/TONE
This selection allows you to set the beeper volume. The following settings may
be used: High:
1919
Medium: 4949
Low:
0C0C
Off: 0000
You can program the type of numeric keypad layout for your keyboard.
Telephone Keypad:
NUMBER KEY LAYOUT
2 3
4 5 6
7 8 9
Calculator Keypad:
Main Keyboard:
7 8 9
4 5 6
1 2 3
1 2 3 4 5 6 7 8 9
Use this selection to program the logical location of the SCANTEAM 8300 in
the controller .
4683 I/O PORT SELECTION
Style A – used when you normally have the CAPS LOCK key off. The
character is sent as it is read. For example, an uppercase character is sent as
a shifted character and a lowercase character is sent as an unshifted
character.
Note for IBM PC/AT:
Style B – used when you normally have the CAPS LOCK key on. The
character is sent as the opposite of how it is read. For example, an uppercase
character is sent as an unshifted character and a lowercase character is sent
as a shifted character.
Style C – does not assume the CAPS LOCK key is in any particular state. The
software tracks and reflects if CAPS LOCK is on or off. This selection can only
be used with systems that have an LED that notes the CAPS LOCK status.
Consequently, an uppercase or lowercase character may be sent shifted or
unshifted depending upon the status of the CAPS LOCK key.