In order to change parameters in one of the lower levels enter the
appropriate ‚level letter‘ und the ‚code‘.
Cleaning parameter “Running times” . . [- P -] . . . . . . . Code 471
Cleaning parameter “Configuration” . . . [- E -] . . . . . . . Code 454
User-defined cleaning functions . . . . . [- b. -] . . . . . . . Code 382
Service parameters . . . . . . . . . . . . . . . [- t -] . . . . . . . . Code 567
Proceed as follows (control unit must be in OFF mode):
Enter level letter:
!
Press the / buttons for 3 seconds at the same time:
Level letter
- P -
appears in the display.
!
Use the / buttons to select the desired level letter and confirm
the correct letter by pressing „SET“:
'000' appears in the display - the first '0' blinks.
Enter code belonging:
!
Use the / buttons to select the first digit of the required code and
confirm the correct digit by pressing „SET“.
The digit is accepted and the second '0' blinks.
!
Use the / buttons to set the second digit and confirm the correct
digit by pressing „SET“.
The third '0' blinks.
!
Use the / buttons to set the third digit and confirm the correct
digit by pressing 'SET'.
The first parameter of the selected level now appears.
If an incorrect code is entered the control unit switches back into OFF
mode.
WMS-100 104193 V2.7 - 14.10.2019
Working level
for normal daily operation
Code 471
Code 454
Code 382
Code 567
Adjustment of parameters in general
Page 23
Cleaning parameter
Configuration
(E-parameters)
Cleaning parameter
running times
(P-parameters)
Service parameters
(t-parameters)
User-defined
cleaning functions
(b-parameters)
