OFF mode (tank empty)
The control unit is on stand-by. The display shows 'OFF', the LEDs are
out and all output replays are deactivated. Only detergent LED 'acidic' or
'alkaline' lights up.
The following operating modes can only be selected from the OFF
mode. It is not possible to switch directly from one of them to another.
CAUTION: The control unit is live even when switched off.
MILKING mode
!
Briefly press MILKING button in OFF mode once:
"
Milking starts automatically, vacuum pump runs.
"
The 'MILKING' LED lights up
"
The 'VACUUM PUMP' LED lights up.
"
The display shows the symbol 'Pulsation'.
Receiver jar emptying
!
Hold down MILKING button in OFF mode:
"
The milk pump remains switched on until the button is released.
"
The display shows 'P.on'.
Switch between acidic and alkaline detergent
In the standard setting, the control system determines the detergent for
the next cleaning process. This button can be used to switch to the other
detergent .
"
The LED for the detergent for the next cleaning lights up.
(If the detergent selection cannot be changed, it means that the control
system is set so that in every washing cycle both detergents are used
one after the other.)
WMS-100 104193 V2.7 - 14.10.2019
vac
°C
vac
Operation of working level
Page 21
Overview of operating possibilities
