°C
vac
WMS-100 104193 V2.7 - 14.10.2019
Operation of working level
Washing can be started only if
the safety switch for the tank
outlet is open.
Only relevant if parameter [E26] is
set to 1
if present:
Page 22
The cleaning process automatically continues according to your set-
tings. The 'CLEANING' LED lights up. Depending on the setting of para-
meter [E97], the display shows the following:
- the current washing stage with the programme step, or
- the current water temperature, or
- automatically changing programme step and, during the
heating phase, the water temperature
Once the cleaning programme has been completed without an error,
the LED 'END OF CLEANING' remains lit until the OFF button is pres-
sed.
START options for cleaning
The detergent LED shows which detergent will be used for the next
washing cycle.
Press cleaning button briefly =
!
The temperature for the main wash 1 is displaye
!
Wash programme starts
START - standard alkaline
Hold down cleaning button =
!
Alkaline wash is switched to hot water
!
The temperature for the main wash 1 is displayed.
!
Wash programme starts
START HOT WASH alkaline
Press cleaning button briefly =
!
The temperature for the main wash 1 is displayed.
!
Wash programme starts
START - standard acidic
After pressing the cleaning button as described above:
Briefly press the cleaning button again =
!
Short rinse starts, as previously set in parameter [E28]
!
“SP..” blinks in the display.
START - SHORT RINSE
