Weishaupt WCM-EM 2.1, Installation And Operating Instruction

Page: 51 / 108

6.5.11 Test heating circuit/DHW outputs
Using parameter Output test, the actuators connected to the WCM-EM can be
switched manually for test purposes.
Setting range extension module heating circuit
Pump On / Pump Off
Mixer Open / Mixer Closed
Setting range extension module DHW
DHW pump On / DHW pump Off
Circ pump On / Circ pump Off
▶
Activate heating engineer level (see Ch. 6.5).
▶
Press function key Heating circuit .
▶
Press function key Extension module #2 .
✓
Menu Extension module #2 is displayed.
▶
Press function key Output test HC and, where applicable, Output test
DHW .
✓
Parameter Output test HC and, where applicable, Output test DHW is
displayed.
▶
Using the function keys set the pump and mixer and, where applicable, the DHW
and circulation pumps.
01
01
Heating circuit
Extension module #2
Extension module #2
Output test HC
Setting #1
Setting #2
End
End
-
+
H1-Fct HK Standby
Output test HC 403
End
On
Open
Closed
HC pump Off
HC mixer Off
Installation and operating instruction
Remote control station WCM-FS 2.0 and extension module WCM-EM 2.1
6 Operation
83277502 • 3/2012-10 • La
51-106