50
Tools and Test Equipment
8. Tools and Test Equipment
This section lists all the tools and test equipment mentioned in these Service and Repair Instructions.
The specific tools and test equipment required in each case are listed in the individual chapter.
You can obtain special tools from WEINMANN.
8.1 General tools
• Flat-head screwdriver, size 0.5 x 3 x 100;
• Phillips screwdriver, size 0;
• Phillips screwdriver, size 1;
• Phillips screwdriver, size 2;
• Open-ended spanner, 13 mm,
for elbow connector at O
2
inlet;
• Open-ended spanner, 22 mm,
for special counter tool;
• Vice with jaw protectors,
countering threaded connection;
• Tubular hexagon box spanner 10 mm,
for adjuster knob;
• Tubular hexagon box spanner 8 mm,
for fascia film;
• Tweezers,
for filter set;
• Diagonal cutter;
• Flat-nose pliers;
• Allen key, 2.5 mm.
• Torque spanner 50 ±5 Ncm;
• Torque spanner 200 ±10 Ncm.
8.2 Special tools
The following tools can be obtained from WEINMANN:
• Special tool set, comprising:
WM 15349
– Special counter tool G 3/8,
WM 22827
for countering threaded connection
at O
2
inlet
– Special spanner, 17 mm,
WM 22828
for counter nut at O
2
inlet;
– Special tool,
WM 22829
for holding securing adjuster knob.
– Set, hose with syringe
WM 15359
– Special pliers
WM 22928
• Test adapter
WM 20907
• Allen key for grooved nut M1 x 0.5
WM 28166
