WEIHONG ELECTRONIC Ncstudio Programming Manual Download Page 21

Page: 21 / 74

上海维宏电子科技股份有限公司

Weihong Electronic Technology Co., Ltd.

18 Specialized, Concentrated, Focused

Fig. 4-9 Processing Outcome after Rotation

G50.1/G51.1 Mirror Image Function

Command Format:

G51.1 X_Y_Z_

G50.1 X_Y_Z_

Description:

X_Y_Z_: For G51.1, specifying mirror image center; for G50.1, specifying the invalid axes of

mirror image function.

The instruction indicates machining the mirror image of machining contour. G51.1 denotes mirror

image on and G50.1 off.

For G51.1, the center of mirror image can be a line, or a point. For example, G51.1 X10 specifies

the mirror image of the contour relative to the line X=10, while G51.1 X10 Y10 Z10 specifies the mirror

image of the contour relative to the point (10, 10, 10).

For G50.1, X_Y_Z_ is used to specify the invalid axes of mirror image function. For example,

G50.1 X0 closes the mirror image function of X-axis, and G50.1 Y0 Z0 closes the mirror image

functions of Y-axis and Z-axis. If X, Y and Z axes are all specified or no one is specified, it denotes the

mirror image functions of all the axes are closed.

Feed Control Commands

G00 Rapid Positioning

Command Format:

G0 X_Y_Z_

Description:

G00: rapidly positioning the tool, but not causing any machining to the workpiece. It can

simultaneously perform rapid movement in several axes to produce a linear track. In the process of

instruction analysis, if there is motion in Z-axis, the motion can be resolved into Z-axis motion and

Summary of Contents for Ncstudio











































































Search results

Summary of Contents for Ncstudio

Reviews:

Related manuals for Ncstudio

Brands by name

Popular brands

WEIHONG ELECTRONIC Ncstudio, Programming Manual

Search results

Summary of Contents for Ncstudio

Reviews:

Related manuals for Ncstudio

Brands by name

Popular brands