1
StatusOutputSetup
Status Output
sense
SOP1
Introduces Status Output One (AUTO/MAN) Setup
-
Next
A0n1
A1n0
Output ‘active’ when in automatic mode
Output ‘active’ when in manual mode
Toggle
Accept
SOP2
Introduces Status Output Two (Handover) Setup
-
Next
HO=0
HO=1
Output ‘inactive’ when in handover mode
Output ‘active’ when in handover mode
Toggle
Accept
Note: ‘active’ means switched to the Common/0V rail
Calibrationoptions
Calibrate
Input?
C Pn
C Py
Skip input calibration
Calibrate inputs
Toggle
Accept
Calibrate
Output?
COPn
COPy
Skip output calibration
Calibrate outputs
Toggle
Accept
Password
PASS
Change Password?
Change
Skip
Save values
SAVE
Instrument is saving the changes to the setup and returning to normal
operation
During setup the
Å
and
ì
keys change values and toggle options.
The
ENT
key accepts changes and moves to the next item in the setup
sequence (see table for each installation configuration).
Do not use set-up mode if the instrument is in service.
Note: if you remove power during the setup sequence, any changes
you have made will not be saved.
InstrumentSetup(continued)
Summary of Contents for AMS400A
Page 2: ......
