User Manual Managed Switches
92
Trap Probe Security Engine ID
Setting
Description
Factory
Default
Disabled/Enabled
This field can only be programmed if the selected
trap version is SNMPv3.
Indicates the SNMP trap
security engine ID. SNMPv3 sends traps and
informs using USM for authentication and privacy.
A unique engine ID for these traps and informs is
needed. When "Trap Probe Security Engine ID" is
enabled, the ID will be probed automatically.
Otherwise, the ID specified in this field is used. The
string must contain an even number (in
hexadecimal format) with number of digits between
10 and 64, but all-zeros and all-'F's are not allowed.
Disabled
Trap Security Name
Setting
Description
Factory
Default
Max. 255
characters
Indicates the SNMP trap security name. SNMPv3
traps and informs using USM for authentication and
privacy. A unique security name is needed when
traps and informs are enabled.
None
SNMP Trap Event
System
Setting
Description
Factory
Default
Check/Uncheck
Enable/Disable the traps related with the complete
system. It is possible to enable traps for cold start,
for warm start of for both events.
Unchecked
Interface
Setting
Description
Factory
Default
Check/Uncheck
Enable/Disable the traps related with the
interfaces/ports of the switch. It is possible to enable
traps for link up, for link down, for LLDP of for all
events.
Unchecked
Authentication
Setting
Description
Factory
Default
Check/Uncheck
Enable/Disable the traps related with the SNMP
authentication failure event.
Unchecked
