User Manual Managed Switches
9
After logging in, the main general information of the switch is shown including, among others, System
Name, Software version, MAC address and Serial number. It is also displayed the front side of the
switch (showing the active ports) in the right navigation panel.
In this home page is also available the button
Enable location alert
. When pressing it, the front
LEDs starts to flash and an acoustic signal is heard (periodic change of the output relay). When
clicking
Disable location alert
, the LEDs will stop flashing and the output relay will remain in its
original position.
Use the menu tree in the left navigation panel to open the function pages to access each of Ethernet
Switch's functions.
NOTE:
The pages of the Web interface include a
Help
button that describes the
parameters and functions that can be programmed or monitored in each web page.
NOTE:
After changing any parameter / function in a web page the button
Apply
activates the change but
does not save it
. The changes have to be saved using the
Save/Manage Configuration
option of the menu.
NOTE:
The pages of the Web interface include also a
Reset
button closed to the Apply
one. If the user modifies any parameter of a web page but still has not applied the
changes, the Reset button can be used to recover the previous default values of the
page. Once the button Apply is pressed, the default values of the page are the new ones.
