Weidmuller Wireless Ethernet Modem & Device Server WI-MOD-E-G/A User Manual
Rev.
2.16
www.weidmuller.com
106
JPerf Application
Jperf is a graphical interface that runs over the top of Iperf. It will display a graph result from the Iperf test.
To run Jperf open a CMD prompt and change to the “jperf-2.0.2: directory and run the “Jperf” application as shown in
Figure 4. The CMD screen will disappear and the Jperf Screen will appear as seen in Figure 5.
Figure 4
Figure 5
When Jperf screen appears select Client Mode, enter in IP address of the Server PC; leave Port as default and press Run
Iperf button. The test will run again and the Bandwidth (Throughput) display will show results of the test.
Note: Jperf runs using Java technology and depending on PC setup further installation of Java software
may be required.
