13
26
20
ATTACHING THE CURL POST
Remove the 44mm Square Inner Cap (30) from the
Front Leg (3). Insert the Curl Post (13) into the Front
Leg and align the holes in the Front Leg and the Curl
Post. Then, secure the Curl Post with the Curl Post
Knob (26).
Make sure that you fully tighten the
Curl Post Knob.
When performing exercises that do not require the
Curl Pad (20), remove the Curl Post (13) from the
Front Leg (3) and store it in the storage tube on the
Right Rear Stabilizer (6). Press the 44mm Square
Inner Cap (30) into the Front Leg.
30
3
6
13
57
51
23
22
12
29
Weight
ADDING WEIGHT TO THE LEG LEVER
To use the Leg Lever (12), slide the desired weights
(not included) onto the Weight Tube (22). Secure the
weights with a 1” Spring Clip (57).
To use Olympic weights, press the Olympic Adapter
Cap (29) into the Olympic Adapter (23). Attach the
Olympic Adapter to the Weight Tube (22) with the M8
x 10mm Set Screw (51).
Make sure the Set Screw
is on the bottom of the Olympic Adapter.
Secure
your weights with the 2” Spring Clip (not shown).
WARNING:
Do not place more than
150 pounds on the Weight Tube (22). Secure
your weights with Spring Clips (57, 58).
ADJUSTING THE WEIGHT RESTS
To use a barbell (not included) with the weight bench,
first move the Weight Rests (33) to the correct height
for the exercise to be performed. Engage the locking
bars around the Left and Right Uprights (8, 9).
WARNING:
Always place both
Weight Rests (33) at the same height. Make sure
the locking bars are securely wrapped around
the Left and Right Uprights (8, 9) before setting
a barbell on them.
9
8
33
33
Locking
Bar
Locking
Bar