6
1
36
1
31
31
37
1.
Attach a Base (36) to an Upright (1) with two
M10 x 35mm Carriage Bolts (37) and two M10
Locknuts (31).
Attach the other Base (36) to the other
Upright (1) in the same way.
36
1
To make assembly easier, make sure
that you have read the assembly tips in
the box above.
ASSEMBLY
To make assembly easier, carefully read the
following information and instructions:
• Assembly requires two persons.
• Because of its weight and size, the weight bench
should be assembled in the location where it will
be used. Make sure that there is enough clear-
ance to walk around the weight bench as you
assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• The following tools (not included) may be required
for assembly:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
