9
8. Insert a Pad Tube (12) into the Leg Lever (6).
Slide two Foam Pads (13) onto the Pad Tube
(12), and then press two Pad Caps (34) into the
Pad Tube.
Attach the other Pad Tube (12), Foam Pads,
(13), and Pad Caps (34) in the same way.
6
13
13
13
34
34
34
34
13
12
12
8
9. Orient the Backrest (8) and the Backrest Tubes
(7) as shown.
Attach the Backrest Tubes (7) to the Backrest
(8) with four M6 x 40mm Screws (32) and four
M6 Washers (22).
Do not tighten the Screws
yet.
8
Wide
End
7
Holes
22
32
22
32
9
7. Apply grease to an M10 x 60mm Bolt (25).
Attach the Leg Lever (6) to the Front Leg (4) with
the M10 x 63mm Bolt (25) and an M10 Locknut
(31).
Do not overtighten the Locknut; the Leg
Lever must pivot easily.
25
31
Grease
6
4
7
