7
3. Attach one end of the Crossbar (2) to two Joint
Plates (11, 35) with two M10 x 66mm Bolts (28)
and two M10 Locknuts (31).
Do not tighten the
Locknuts yet.
Attach the other end of the Crossbar (2) in
the same way.
3
28
35
11
2
31
2
28
11
11
35
1
10
31
2. Orient one of the Uprights (1) so that the
Upright Cover (10) is on the side shown.
Next, orient a Left Joint Plate (35) and a Right
Joint Plate (11) as shown. Attach the Joint
Plates to the Upright (1) with two M10 x 66mm
Bolts (28) and two M10 Locknuts (31).
Do not
tighten the Locknuts yet.
Repeat this step with the other Upright (1)
and the other Joint Plates (11, 35), making
sure that they are oriented as shown.
35
1
