12
ADJUSTING THE WEIGHT RESTS
To change the height of the Weight Rests (15),
remove them from the Uprights (1) and insert them
into a different set of holes in the Uprights.
Rotate
the Weight Rests so that the locking pins are
wrapped around the Uprights.
15
1
Locking
Pin
Locking
Pin
15
1
WARNING:
Always rotate the
Weight Rests (15) so that the locking pins
are wrapped around the Uprights (1).
Always set both Weight Rests at the same
height.
STORING THE WEIGHT BENCH
Before storing the weight bench, remove any
weights from the Leg Lever (6).
To store the weight bench, first remove the Lock
Knob (27) and the Lock Pin (38) from the bracket
on the Crossbar (2).
Next, raise the Frame (3) and the Front Leg (4) to
the position shown.
Then, insert the Lock Pin (38) into the side of the
bracket on the Crossbar (2), and insert the Lock
Knob (27) into the top of the bracket. The Lock Pin
will prevent the weight bench from unfolding.
2
4
3
6
27
38