Patent applies.
ASSEMBLY INSTRUCTIONS
Power II
TM
ITEMS FOR ASSEMBLY
ITEM #’s
Bed frame assembly
P1-1000
Chain with crank
P1-5004
Rear frame
P1-1001
Front frame
P1-1002
Main shaft
P1-2100
Locking knobs
P1-1003
Handles
P1-1015
DO NOT DISCARD - KEEP FOR FUTURE REFERENCE.
Figure 1
P1-1000
Note: The bed frame assembly arrives rotated into the fully inverted position.
This is the most convenient position from which to begin the assembly process.
STEP ONE
Secure rear frame (P1-1001) to bed frame assembly (P1-1000)
•
Insert the rear frame into the bed frame assembly (the logo on the bed will
be facing the rear). (See Figure 1) Make sure the spring-loaded locking
pins on each leg pop through the holes.
STEP TWO
Secure front frame (P1-1002) to bed frame assembly (P1-1000)
•
Insert the front frame into the bed frame assembly. Make sure the spring-
loaded locking pins on each leg pop through the holes.
ASSEMBLY
Before you begin:
These instructions will guide you in properly assembling the unit. Please review all the steps before beginning assembly.
Carefully adhere to the Assembly Instructions and Owner’s Manual to help ensure user safety and product integrity.
1. Failure to assemble and/or use the equipment as directed may void the manufacturer’s warranty on this product and could
result in injury or death.
2. It is your responsibility to familiarize yourself with the proper use of the equipment and the inherent risks of inversion, such
as falling on your head or neck, pinching, entrapment or equipment failure.
3. Do not use the inversion table until you have thoroughly and carefully read the Owner’s Manual, reviewed all other
accompanying documents, and inspected the equipment.
4. Choose a level surface for assembling and operating the table.
5. Follow each step in sequence. Do not skip ahead.
6. Make sure that all fasteners are secure.
7. Prior to use, test and inspect the table to ensure smooth operation.
8. Refer to additional warning notices and information posted on the equipment.
!
WARNING
Carefully remove the individual parts from the carton. You should have all of the items listed below. If any items are missing or damaged, contact
your retailer or customer service directly (See reverse side).
P1-1001
rear
P1-1002
front
P1-2100
P1-1015
P1-1003
arrive assembled
in the main shaft
front frame
rear frame
P1-5004
Ensure that the spring-loaded locking pins are attached
securely and that the front and rear frames sit evenly on the
floor. Improper assembly could result in serious injury or death.
!
WARNING
