10
10. Apply grease to an M10 x 135mm Bolt (23).
Attach the Backrest Tubes (7) to the welded
tube on the Frame (3) with the M10 x 135mm
Bolt (23), two M10 Washers (30), and an M10
Locknut (31).
Do not overtighten the Locknut;
the Backrest Tubes must pivot easily.
See step 9. Tighten the M6 x 40mm Screws
(32).
31 30
7
3
23
Grease
10
30
12.
Make sure that all parts are properly tightened before you use the weight bench.
The use of all remain-
ing parts will be explained in ADJUSTMENT, beginning on page 11.
11. Attach the Seat (9) to the Frame (3) with four
M6 x 16mm Screws (24).
9
3
24
11
Tube