Wegener UNITY4000, Instruction Manual

Page: 40 / 75

UTY4000-003 3-12
Table 3-11. LC Display Menus
Note: Screens marked by ‘*’ are not shown if local control is disabled (either programmed
into non-volatile memory at factory or set by COMPEL command).
Exception: “Audio
Settings” screen is shown but only “Attenuation” may be changed by local user.
MAIN LEVEL SECOND LEVEL THIRD LEVEL
Home Screen N/A N/A
Email Email Msg
Hardware Setup Current Settings* RF Feed (Optional), Carrier Frequency and Data-rate
FEC rate, Tag Site, and Program #
Channel Select*
Edit Channel*
For each possible channel entry...
RF Feed (Optional), Carrier Frequency and Data-Rate
FEC rate, Tag Site, and Program #
Audio Settings* Channel 1
:
:
Channel n
SNR Alarm Threshold
Serial Ports
Select Serial Port Devices
Modem Password
Printer Settings
Modem Settings
Aux Data Device Settings
LNB LOs
Unit Reset
Status Reports Settings Status PERM, TEMP, or SEARCH settings
Carrier Status (Tracking) Acq. Mode, Mode Duration
RF In, Carrier, Data Rate, FEC Rate
Tag, Program ID
EbNo Margin/Level
Last Acq., EbNo high/low
First Acq., Availability
RF Level, EbNo Level Status
Table 3-12. LC Display Menus (Continued)
MAIN LEVEL SECOND LEVEL THIRD LEVEL