Wegener UNITY4000, Instruction Manual, Page: 12 / 75

UTY4000-003 1-2
arranged without empty space between them, as long as enough rack ventilation is provided to
prevent severe heat buildup. Please note the maximum per-unit power dissipation of 45 watts.
1.5 SECURITY LABELS
The UNITY4000 uses security labels over some of the screws. There are no user serviceable
components within the unit, and tampering with the security labels or opening the units will void
your warranty. If you have questions, contact Wegener's customer service department at the
address, phone, or fax numbers listed in Section 1.7 of this manual.
* * * WARNING * * *
When connecting cables to “F” type connectors apply a force of no more
than 12 inch lb. (Finger tight). Avoid connecting adapters directly to “F”
type connectors. Use at minimum a 1 foot flexible extension cable
between “F” type connectors and adapters
.
1.6 PHYSICAL SPECIFICATIONS
The operating temperature of the IRD is +10°C to +40°C in still air with unblocked side vents.
(The unit is fan-cooled.)
Table 1-1. Physical Specifications
Parameter Description
Size 19”W x 1.75”H x 13.75”D
Weight 10.5 Pounds
Operating Temperature +10°C to +40°C
Power Requirements 115VAC, 60Hz, 0.8A Typ., or 230VAC,
50Hz, 0.5A Typ.
1.7 TECHNICAL SUPPORT
In the event the unit fails to perform as described, contact Wegener Communications Customer
Service at (770) 814-4057, FAX (678) 624-0294, or E-Mail “
service@wegener.com ”.