Wegener UNITY 550, User Manual

Page: 19 / 58

www.wegener.com 800072-01 Rev. A 13
Unity 550 User’s Manual
C
HAPTER
3 O
PERATION
This chapter provides information and procedures for powering up and operating the unit.
The IRD can be controlled via
COMPEL
, local terminal, modem (remote terminal), and OSD
(On-Screen-Display) push buttons. Normally,
COMPEL
is the primary method of controlling
the IRD, while the other control methods are supplemental.
See COMPEL™ System Control
on page 18
for more information, and the
COMPEL
Manual for a complete explanation of
COMPEL
controls.
3.1 Front Panel Controls And Indicators
Figure 3.1
shows the
Unity 550
front panel controls and describes them in
Table 3.1
. The
IRD can be controlled via
COMPEL
Network Control, local terminal, modem (remote
terminal) and OSD push buttons. Normally,
COMPEL
is the primary method of controlling
the IRD, while the other control methods are supplemental.
Figure 3.1: Unity 550 Front Panel
Table 3.1: Unity 550 Front Panel Controls and Indicators
LCD Menu
Navigation
Operate the Unity 550 from the front panel using the arrow buttons and the LCD as shown
in Figure 3.1 . Menu screens on the LCD direct you to screens that control various operating
functions including:
programming
audio
LCD
screen
bottom arrow
button
ENTER
button
left arrow
button
top arrow
button
LED
Item Description
LED Activates automatically by certain status conditions, such as
loss of signal.
Liquid-Crystal Display
(LCD) screen Displays menus that control various operating functions.
Arrow buttons Push buttons for LCD navigation.
ENTER Push button for LCD operation.