Wegener UNITY 550, User Manual

Page: 40 / 58

34 800072-01 Rev. A www.wegener.com
source: If no source is specified then video and all audio outputs are selected. Source can be any
of the following:
V Indicates Video.
A[/string] Indicates Audio. An A alone indicates all audio outputs.
L mutes the left channel and R mutes the right.
Mutes the specified outputs. Example: MUTE V A1L A2, mutes the Video, Audio Port 1 left, Ports 2 left
and right.
PERM settings
settings:
See
Section 4.1 Perms/Temps/Searching & Settings
on page 25, Perms/Temps/
Searching & Settings.
Unit sets its Perm settings to settings. See
Section 4.1 Perms/Temps/Searching & Settings
on
page 25 for more information.
PERMCH location
location: Value from 1 to 48 indicating location in the Settings Table.
Unit sets its Perm settings to those retrieved from the Settings Table according to location. See
Section 4.2 Settings Table (or Search Table) on page 26.
SETAUDIO port route [program] [atten]
port:
Values of 1 to 6, indicating an audio port.
route:
[program]:
Can be a three character name or an *. If the 3-character name is specified, the unit will
route the audio program with the specified name to the port. If *' is specified, the unit will default to the
first audio program that is not routed to another port.
[atten]
Must be a numeric value between 0 and 14 inclusive. This programs the net audio
attenuation, where 0 gives 0dB attenuation (maximum level). If field is omitted, attenuation remains
unchanged on that audio port.
The audio program is routed to the audio port's audio switch, and its components are routed to the Left
and Right outputs according to route. That port's attenuation is changed to atten if that parameter is
supplied.
SETTIMEOUT source time
S - Stereo (Left and Right components routed as connected at original MPEG encoder)
1 - Original Left component to both L and R outputs
2
- Original Right component to both L and R outputs
R
- Reverse stereo (reverse of Stereo above)