Weco Discovery 172T, Instruction Manual

Page: 13 / 56

WELD THE WORLD
Cod. 006.0001.1960
03/05/2019 V.2.2
Discovery 172T
13
ENGLISH
5 RESET (LOAD FACTORY SETTINGS)
SYN
L1 L2 L3
L15
L13
L14
L10 L11 L12
L29 L28
D1 S1
S2
E1
L6
S3 S4 S5 S6
L9
L8
L4
L5
L7
L33
L31
L32
L30
L26 L27
L18
L22 L20
L21
L23
L24
L25
L17
L16
L19
FAC
A
A
ACTIVATION
ACTIVATION
The reset procedure involves complete restoration of the default values, parameters and memory set -
tings set in the factory.
All memory locations will be reset and hence all your personal welding settings will be lost!
The reset procedure is useful in the following cases:
- Too many changes made to the welding parameters so user finds it difficult to restore defaults.
- Unidentified software problems that prevent the welding power source from functioning correctly.
A
○ Set the welding power source ON/OFF switch to “O” to switch the unit off.
○ Keeping both the S2 and S6 buttons pressed, set the generator power source
switch to “I” to turn on the equipment [ SIMULTANEOUS ACTIONS]
○ Press both buttons S2 and S6
FAC : The message will appear on display D1
- Wait for the memory clear procedure to terminate. This action will automatically close the
menu.