Weco Discovery 172T, Instruction Manual

Page: 19 / 56

WELD THE WORLD
Cod. 006.0001.1960
03/05/2019 V.2.2
Discovery 172T
19
ENGLISH
8.2 MMA WELDING - SECOND LEVEL MENU
SYN
L1 L2 L3
L15
L13
L14
L10 L11 L12
L29 L28
D1 S1
S2
E1
L6
S3 S4 S5 S6
L9
L8
L4
L5
L7
L33
L31
L32
L30
L26 L27
L18
L22 L20
L21
L23
L24
L25
L17
L16
L19
EL.
A
3 sec ACTIVA-
TION/SELECTION
B
SETTING
A
○ Hold down the S2 button for 3 seconds to access the 2nd level menu.
The LED will illuminate.
○ Use the
encoder E1
to scroll the list of settings to be edited.
The acronym relative to the selected setting is shown on display D1.
○ Press the S3 button to confirm.
The value relative to the selected setting appears on display D1.
B
○ Using the encoder E1 , edit the value of the selected setting.
Tab. 4 - Parameters of the 2nd level menu: MMA mode
ACRONYM / LED SETTING MIN DEFAULT MAX NOTES
EL. ELECTRODE TYPE - bAS -
bAS= basic
rUt= rutile
Crn= chromium/
nickel
ALU= aluminium
Urd VRD (OUTPUT VOLTAGE REDUCTION) oFF oFF On *4
U.EL. LONG ARC VOLTAGE MMA 37 SYn 65 *2
rC REMOTE CONTROL ACTIVATION oFF oFF On *3
Press any key ( except S3 ) to save the setting and quit the menu.
*2: SYN: This code indicates that parameters control is synergic. The optimal value of this param -
eter is set automatically by the microprocessor on the basis of the preset welding current value.
This value can be displayed but it is not user-adjustable.
When
SYN
is installed, to display the synergic value press the following button:
S1