Chapter 8
Operation
40001136 Geset 125
Version: 30.07.14
Page 44 of 57
GB
Operator panel
Fig. 8-3: Operator elements
No.
Description
1
EMERGENCY STOP PUSHBUTTON
2
RED BUTTON AUTOMATIC OFF
3
GREEN ILLUMINATED BUTTON AUTOMATIC ON
Turn on labeling operation
The automatic operation is used to label products. .
Requirements
¥
Labeling system is turned off.
¥
Material rolls at labeling system are loaded and threaded.
¥
Labeling system is connected to power.
¥
System was put into operation (see chapter „Installation and initial startup” on
page 29).
Instruction
Please turn on the labeling system for operation as follows
Step
Procedure
1
Turn on the main switch.
Risk of injury from crushing! Hazards from actively controlled movements.
Keep away from moving parts.
2
Push the [START] –button at labeler.
3
Push the [AUTOMATIC ON] –button at operator panel.
4
Add the products to the labeling system.
5
Remove the products from outfeed of the labeling system.
Summary of Contents for Geset 125
Page 2: ...Blank Page...
