Weber mt TRC 66, Operating And Maintenance Instruction Manual

Page: 26 / 60

TRC66-86 *** 26
2.6.3 Steering
The driving speeds and the curve radii are
changed by the various drive lever
movements.
2.6.3.1Turning a R. H. Curve
- Push the L. H. drive lever (27/2) to the front ,
according to the desired curve radius.
- Push the R. H. drive lever (27/1) less to the front,
according to the desired curve radius.
2.6.3.2 Turning a L. H. Curve
- Push the R. H. drive lever (29/1) to the front,
according to the desired curve radius.
- Push the L. H. drive lever (29/2) less to the front,
according to the desired curve radius.
2.6.3.3 Turning a Narrow R. H. Curve
- Push the L. H. drive lever (30/2) to the front,
according to the desired curve radius.
- Pull the R. H. drive lever (30/1) backwards,
according to the desired curve radius.
2.6.3.4 Turning a Narrow L. H. Curve
- Push the R. H. drive lever (31/1) to the front,
according to the desired curve radius.
- Pull the L. H. drive lever (31/2) backwards,
according to the desired curve radius.
2.6.3.5 Turning on the Spot
- Push or pull the drive levers in opposite directions.
1 2
Figure 28
1 2
Figure 29
1
2
Figure 30
1
2
Figure 31
1 2
2 1
2
1
1
2