Webee Wireless N Router with 3G Modem Support User Manual Download Page 75

 
 
USER MANUAL OF WEBEE WIRELESS N ROUTER  

 

Version:1.1 

Firmware Type 2  

P/N: 60291092 

 

75

 

 

 

 

 

5.

 

WARRANTY AND SUPPORT 

 

The Webee Router has a 2 year hardware warranty.  
 
If you encounter a hardware problem during the warranty period, please contact your 
reseller.  
 
For more information and support on the network services, please contact your service 
provider.  
 
For more information and support on the router, you may contact the helpdesk service of 
the importer.  
 
The importer will provide software updates on their web site.   
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Importer in Sweden

   

DAIMLER SWEDEN AB  

www.daimler.se 

 

Technical Support: 

[email protected] 

 
 

Importer in Finland  

DAIMLER FINLAND OY AB  

www.daimler.fi 

 

Technical Support: 

[email protected] 

 

Tel. +358 9 5601 1234 

Mon-Fri  08.30 – 16.30

 

Importer in Denmark

  

DF COM APS   

www.dfcom.dk 

 

Technical Support : 

[email protected] 

 
 

Importer in Estonia 

DAIMLER EESTI OÜ  

www.daimlereesti.ee 

 

Technical Support: 

[email protected] 

 
 

Summary of Contents for Wireless N Router with 3G Modem Support




























































































Reviews: