Webee Wireless N Router with 3G Modem Support, User Manual, Page: 26 / 91

USER MANUAL OF WEBEE WIRELESS N ROUTER
Version:1.1
Firmware Type 2
P/N: 60291092
26
4.16 What is WPA2?
Use 802.1x Authentication While Encryption is selected to be WEP.
Click the check box to enable IEEE 802.1x authentication
function.
Refer to 4.17 What is 802.1x Authentication?
Authentication Type Click to select the authentication type in Open System ,
Shared Key or Auto selection.
Key Length Select the WEP shared secret key length from pull-down
menu. The length can be chose between 64-bit and 128-bit
(known as “WEP2”) keys.
The WEP key is composed of initialization vector (24 bits) and
secret key (40-bit or 104-bit).
Key Format Select the WEP shared secret key format from pull-down
menu. The format can be chose between plant text (ASCII)
and hexadecimal (HEX) code.
Encryption Key Secret key of WEP security encryption function.
WPA Authentication Mode While Encryption is selected to be WPA.
Click to select the WPA Authentication Mode with Enterprise
(RADIUS) or Personal (Pre-Shared Key).
Refer to 4.15 What is Wi-Fi Protected Access (WPA)?
WPA Cipher Suite Select the Cipher Suite for WPA encryption.
4.18 What is Temporal Key Integrity Protocol (TKIP)? 4.19
What is Advanced Encryption Standard (AES)?
WPA2 Cipher Suite Select the Cipher Suite for WPA2 encryption.
Pre-Shared Key Format While Encryption is selected to be WPA.
Select the Pre-shared key format from the pull-down menu.
The format can be Passphrase or Hex (64 characters).
[WPA,
Personal(Pre-Shared Key) only]
Pre-Shared Key Fill in the key value. [WPA, Personal(Pre-Shared Key) only]
Enable Pre-Authentication Click to enable Pre-Authentication. [WPA2/WPA2 Mixed only,
Enterprise only]
Authentication RADIUS Server Set the IP address, port and login password information of
authentication RADIUS sever.
Apply Changes Click the Apply Changes button to complete the new
configuration setting.
Reset Click the Reset button to abort change and recover the
previous configuration setting.
WEP encryption key (secret key) length:
Length
Format
64-bit 128-bit
ASCII 5 characters 13 characters
HEX 10 hexadecimal codes 26 hexadecimal codes
4.3.7 Wireless - Access Control
If you enable wireless access control, only those clients whose wireless MAC addresses
are in the access control list will be able to connect to your Access Point. When this
option is enabled, no wireless clients will be able to connect if the list contains no entries.