Webee Wireless N Router with 3G Modem Support, User Manual, Page: 40 / 91

USER MANUAL OF WEBEE WIRELESS N ROUTER
Version:1.1
Firmware Type 2
P/N: 60291092
40
4.3.14 WAN Interface Setup
This page is used to configure the parameters for wide area network that connects to the
WAN port of your Webee Router. Here you may change the access method to
Static IP ,
DHCP , PPPoE , PPTP L2TP or GSM 3.5G by click the item value of
WAN Access
Type
.
Static IP
Item Description
Static IP Click to select Static IP support on WAN interface. There are IP address,
subnet mask and default gateway settings need to be done.
IP Address If you select the Static IP support on WAN interface, fill in the IP address
for it.
Subnet Mask If you select the Static IP support on WAN interface, fill in the subnet mask
for it.
Default Gateway If you select the Static IP support on WAN interface, fill in the default
gateway for WAN interface out going data packets.
MTU Size Fill in the mtu size of MTU Size. The default value is 1500
DNS 1 Fill in the IP address of Domain Name Server 1.